How To Install Merkury Doorbell Camera Without Existing Doorbell

RobotPoweredHome is reader-supported. When you buy through links on my weblog, I may earn an chapter commission. Every bit an Amazon Associate, I earn from qualifying purchases.

I was strolling downward the produce alley at my local Walmart shopping for groceries one afternoon.

Information technology was a rather decorated twenty-four hour period, so my listen was preoccupied. However, out of habit, I found that my legs had taken me to the tech aisle, and my eyes landed on the Merkury Smart Wi-Fi Doorbell Camera. My curiosity was piqued.

As a Smart Dwelling nerd who has experimented with doorbells of all shapes and sizes,

I was excited to try out this new doorbell like a child with a new toy. I didn't really take a divide doorbell excursion, just in my tinkering adventures, I'd managed to install video doorbells from Band, Nest, SimpliSafe, among others, all without an existing doorbell, so I was fairly confident in my abilities.

Unfortunately, there wasn't much documentation on the Merkury Smart Wi-Fi Doorbell, then the research was not every bit straightforward equally I'd initially thought.

However, I relished the challenge, and in a couple of days, I managed to pull it off.

The Merkury Smart Wi-Fi Doorbell Camera is a reasonably priced and feature-rich doorbell that allows integration with smart administration like Google and Alexa.

It also comes with weatherproofing, dark vision, and motion sensors that transport you real-fourth dimension alerts on your phone via the uniform Geeni app.

Although the smart doorbell is designed to work with an existing doorbell, with an easy and price-efficient workaround, you can install it even if you don't have a doorbell system in place.

To install a Merkury smart Wi-Fi doorbell without an existing doorbell system, you can use an advisable indoor power adaptor that fulfills the device's voltage requirements.

I recommend the OhmKat Professional Video Doorbell Power Supply, which has served me well on multiple occasions.

Notation: that an incompatible power adaptor can harm your smart doorbell.

Merkury Smart Wi-Fi Doorbell Voltage Requirements

As mentioned, the Merkury smart Wi-Fi doorbell has been designed to work with an existing doorbell arrangement.

If you go by the recommended installation process, you have to hardwire the device with the wires that connect to the analog doorbell.

Hence, information technology needs to be connected via wires that provide an alternating current betwixt sixteen-24 V and a minimum power of 10 VA. Note that these requirements are for North America.

If you live in Europe, and then y'all will have to look for an adaptor that delivers an alternating current betwixt 12-24 V and a minimum power of 8 VA.

We are going to subvert the need for this existing doorbell and wiring by using an indoor power adapter, also known as a plugin transformer that transforms the expensive thing of hardwiring a doorbell into a cheap and effortless chore.

Indoor Power Adapter for Merkury Smart Wi-Fi Doorbell

During the installation process, I tested out a couple of adaptors. It turns out that not every adaptor is compatible with the Merkury video doorbell, so I turned to my reliable fallback.

Then I finally came across the OhmKat Professional Video Doorbell Power Supply that works pretty well with the doorbell.

All I had to do was connect the blackness and ruddy wire at the dorsum of the doorbell with a screwdriver and plug the adaptor into the nearest wall outlet.

The Merkury Wi-Fi doorbell comes with two silver screws, also called terminals at the back.

All you lot have to practise is slightly unscrew them, identify the bare wires underneath them and tighten over again.

It does not matter which wire connects to which terminal. Once the screws are in place, plug the adaptor.

The cherry-red calorie-free of the doorbell will plough on, indicating that the connexion process was successful.

Extending the Adapter Wire for your Merkury Smart Wi-Fi Doorbell if Necessary

To my surprise, the 12-feet long wire the OhmKat adaptor comes with was not enough for me.

I was at least ii-anxiety curt of the nearest power outlet. Thankfully, I had this half-dozen-feet long Doorbell Power Supply Extension Cord lying around from ane of my previous projects. I employed it to extend the length of the wire to plug the adaptor.

Before investing in an adaptor, do cheque whether your power outlet lies within the 12-foot range from where you lot want to mount your doorbell.

If not, then no need to worry; an extension cord takes intendance of that.

Install a Plug-In Chime Instead of a Chime Box for your Merkury Smart Wi-Fi Doorbell

The video doorbell under discussion comes with its ain chime connector, just yous will not need it if you lot programme to connect your smart doorbell using an indoor power adaptor.

The modest white box-like device that comes with the doorbell in the box is a chime connector.

The chime connector allows the doorbell to have its own chinkle circuit, separate from the analog doorbell'due south excursion.

It prevents any power interferences that the already existing chime box can crusade.

The plug-in chime box also provides yous with the same functionality but with added comfort.

Since I went for the OhmKat adaptor, I decided to get with the OhmKat Wireless Universal Video Doorbell Chime, the adaptor'due south natural companion.

All yous have to do is install the chime in the split connection between the doorbell and the adaptor.

This way, it draws the power from the adaptor, and yous don't have to plug it in separately.

The best office is, y'all don't have to buy any boosted wiring. The OhmKat adaptor natively comes with a separate connection for connecting the chime box.

How to Mount Your Merkury Smart Wi-Fi Doorbell

Mounting the doorbell on the wall is the only tricky part of the whole procedure.

Likewise, I'd suggest that you connect the doorbell to the uniform Geeni app before mounting it.

Information technology'll save you from having to awkwardly stand up around in the hallway trying to pair the doorbell to the app like I had to.

The instructions for app connection are mentioned below.

The doorbell does not come with a mounting stencil. Hence, to make drilling easy, I marked the pigsty placements on a canvas of paper and stuck it to the wall.

I'd recommend that you mount the doorbell on the wall such that it is approximately 4 to 4.five feet higher up ground level.

This will make it like shooting fish in a barrel for you to expect at the faces of the visitors. Moreover, this is also the optimal height for sensors to work correctly.

I used the ix mm drill for the holes. After you have drilled the holes, screw in the mount and place the doorbell over information technology.

I did non want to drill a hole across the wall to run the wires through information technology. So, I got some circumvolve cable hooks and ran the wires under the firm'due south main door. The circumvolve cablevision hooks help keep them in place.

However, if you want to drill a hole and run the wires through them, use a bigger drill bit to drill a hole between the two spiral holes of the mount.

Clean all the debris and run the wires through them. For this, you volition have to connect the wires to the final subsequently they are passed through the hole.

Setting up Merkury Smart Wifi Doorbell with the Geeni App

All Merkury products are connected to your smartphone using the Geeni app.

The connection process is relatively like shooting fish in a barrel, and it hardly took me a few minutes to fix information technology up with the app.

Once you have plugged in your doorbell, yous volition see a crimson light. This means that the device is plugged in, but it is not connected to the Wi-Fi.

The setup process is rather elementary and y'all tin can get it done past following these steps:

1. Download the Geeni app from the PlayStore or AppStore.
2. Click the add together device push button.
3. Select the Smart doorbell category.
4. Yous will be prompted to turn your device on. If it is already turned on, ignore this and click on the 'Next step' push. If your device is non showing the red low-cal, at that place is a trouble with the connection. Turn it on and then select 'Next step'.
5. A pop-up display will inquire you to confirm the Wi-Fi connectedness y'all want to connect your doorbell with.
6. One time yous confirm your Wi-Fi connection, a QR code will appear on the screen. Scan it with your camera. You will hear a beep, which ways the connexion was successful.

At present, if anyone rings the doorbell, or if there is any motility in the surface area in forepart of your master door, you will be alerted via the application.

Moreover, the doorbell has a microphone and a speaker while the app activates your phone's speaker and microphone. This way, you tin can as well apply the camera as an intercom.

Conclusion

The Merkury smart Wi-Fi doorbell with a photographic camera is advertised as a system that needs to be hardwired to an existing doorbell arrangement.

However, I can ostend that using a plug-in adaptor and chinkle; you can set the whole affair up within a few minutes even if you accept never installed a doorbell before.

I know this considering I have installed Ring, Nest, SimpliSafe, and Zmodo doorbells without ever having an existing doorbell by using indoor power adapters.

It's quite the cracking little thing, this Merkury Doorbell and I'm surprised they managed to fit in features on par with other brands out there, at such an affordable toll point.

I've used the doorbell to talk to delivery men while I was away from dwelling. Porch pirates are something of a menace in my neighborhood, and the Merkury doorbell lets me instruct deliverymen to identify my packages out of sight from the street.

Walmart also offers other great products with brands nether its umbrella, like onn TVs.

You May Also Enjoy Reading:

• How Does Ring Doorbell Work If You Don't Accept A Doorbell?
• 4 All-time Video Doorbells Without Subscription in 2021
• Best Apple HomeKit Enabled Video Doorbells You Can Buy Now
• Best Band Doorbells for Apartments And Renters

Oftentimes Asked Questions

Does Merkury Smart Wifi Doorbell record?

The Merkury smart Wi-Fi doorbell comes with a recording feature, only yous take to install a microSD card in it for it to work.

Since the device records 1080p videos, information technology is brash that you lot use a minimum of sixteen GB capacity SD card.

Is Merkury and Geeni the aforementioned?

Geeni is a subsidiary of Merkury innovations that deal with smart home products. Hence, all Merkury Wi-Fi products use the Geeni app to communicate with the user.

What devices work with the Geeni app?

All the smart products developed by Merkury innovations work with the Geeni app.

Source: https://robotpoweredhome.com/how-to-install-merkury-smart-wifi-doorbell-camera-without-existing-doorbell/#:~:text=The%20Merkury%20Wi%2DFi%20doorbell,in%20place%2C%20plug%20the%20adaptor.

Posted by: schultzplefuspritir.blogspot.com

Share this post